If you have a few Mac computers in your household or office, you probably don't want to spend hours downloading the large macOS installation file multiple times. But Apple doesn't save the macOS installer in an obvious location, so it's difficult to use the same file again.
Mac Os Software Update Download Location
DOWNLOAD: https://urlgoal.com/2vAPar
If you want to use the macOS installer multiple times, and you don't save it first, you need to download it again on each Mac you update. This takes a long time to do and sucks up your internet bandwidth in the process, as each download could take two hours or more.
To make matters even worse, if you download the latest macOS update as soon as Apple makes it available, download times are likely to be even slower while Apple's servers struggle to keep up with initial demand.
You can save yourself a lot of hassle by saving the macOS installer after downloading it the first time. That way, you can use the same macOS installer to update as many Mac computers as you need without multiple downloads.
If you're sick of waiting for the progress bar to complete every time you reboot after a macOS software update, then you'll be pleased to learn there's another way to update your Mac that could potentially reduce your downtime.
The process involves a simple Terminal command, and allows you to continue using your Mac as the update downloads and the initial software installation takes place in the background. In our tests, we found that this method was capable of shaving off several minutes of idle time during installation restarts, but that the time-saving depends on the machine and the update in question.
The second line offers a more detailed description of the update, including the version number (usually in brackets) and the download file size in kilobytes. [Recommended] means the update is recommended for all users, and [restart] indicates that your Mac needs to reboot for installation to complete.
Updates downloaded in this way can be subsequently installed with the same -i or --install command above, or even through the Mac App Store. These updates are downloaded to a folder located in /Library/Updates, but they aren't designed to be installed by double-clicking the packages in that directory. You'll need to use the --install command or visit the Mac App Store to actually initiate the install.
Using these commands, you'll be able to leave the update to download and continue to install in the background while you get on with other things. All being well, Terminal will eventually prompt you to restart your machine manually so that the full installation procedure can complete. (Note that the softwareupdate utility requires admin authentication for all commands except the -l or -list command. If you run softwareupdate as a normal admin user, you will be prompted for a password where required.)
As some users will no doubt be aware, there are several additional options that can be used in conjunction with the softwareupdate utility. For example, -schedule on/off enables/disables your Mac's scheduled background check for updates. More adventurous readers can use man softwareupdate and softwareupdate -h for a summary list of commands.
To update your current installation of AWS CLI on Windows, download a new installer each time you update to overwrite previous versions. AWS CLI is updated regularly. To see when the latest version was released, see the AWS CLI version 2 Changelog on GitHub.
Apple has replaced iTunes with Music, Podcasts, Books, and Apple TV with the release of macOS Catalina. Finder is the new place to back up, update, or restore your devices. But, if your Mac's running macOS Mojave or later, you can still use iTunes. Now, let's see how you can remove old iOS software updates from your Mac.
iOS update files can be found at /Library/iTunes, where "" is your Home folder. Notice that software updates differ for different devices. That means that, for instance, the iPad firmware files will be kept at /Library/iTunes/iPad Software Updates, while you will find the same files for iPhone in /Library/iTunes/iPhone Software Updates.
Instead of looking for iOS software updates on your Mac manually and making decisions about what files you want to delete or leave untouched, you can take advantage of CleanMyMac X. Launch it, hit Scan, and then Clean, and the app will clean your Mac from unneeded data cluttering your system, Trashes and iPhoto library (if you have one), including outdated iOS software updates.
macOS Ventura takes the Mac experience to a whole new level with groundbreaking capabilities that help users achieve more than ever. New features like Continuity Camera enable users to seamlessly work across their Apple devices, and productivity tools including Stage Manager help users stay focused and easily move between tasks. Safari ushers in a passwordless future with passkeys, and big updates come to popular apps including Mail and Messages. macOS Ventura is available today as a free software update on Macs with Apple silicon and Intel-based Macs.1
Spotlight comes with new features and an updated design that provides a more consistent experience across Mac, iPhone, and iPad. Users can now use Spotlight to find images in their photo library, on the web, and across the system in apps like Messages and Notes. They can even search for their photos by location, people, scenes, or objects, and Live Text lets them search by text inside images. Spotlight also includes rich results for categories for artists, movies, actors, TV shows, businesses, and sports. To take their productivity even further, users can take actions from Spotlight to do things like start a timer or create a new document. And with support for Quick Look in Spotlight, users can quickly see a full-size preview of nearly any kind of file without having to open it.
To change both the download directory and location of the configuration file, set the WORKSPACE environment variable toany user-writable directory. This approach is particularly useful if you have an isolated SnowSQL environment for each process.
You can change both the download directory and location of the configuration file by setting the WORKSPACE environment variable to any user-writabledirectory. This is particularly useful if you have an isolated SnowSQL environment for each process.
Package binaries for R versions older than 3.2.0 are only available from the CRAN archive so users of such versions should adjust the CRAN mirror setting ( -archive.r-project.org) accordingly.R 4.2.2 "Innocent and Trusting" released on 2022/10/31 Please check the integrity of the downloaded package by checking the signature: pkgutil --check-signature R-4.2.2.pkg in the Terminal application. If Apple tools are not avaiable you can check the SHA1 checksum of the downloaded image: openssl sha1 R-4.2.2.pkgLatest release:R-4.2.2-arm64.pkg (notarized and signed)SHA1-hash: c3bb657ca6912b9b98e254f63434a365da26848f(ca. 86MB) for M1 and higher Macs only! R 4.2.2 binary for macOS 11 (Big Sur) and higher, Apple silicon arm64 build, signed and notarized package. Contains R 4.2.2 framework, R.app GUI 1.79 for Apple silicon Macs (M1 and higher), Tcl/Tk 8.6.12 X11 libraries and Texinfo 6.8. Important: this version does NOT work on older Intel-based Macs - see below for Intel version.Note: the use of X11 (including tcltk) requires XQuartz (version 2.8.1 or later). Always re-install XQuartz when upgrading your macOS to a new major version.This release uses Xcode 13.1 and experimental GNU Fortran 12 arm64 fork. If you wish to compile R packages which contain Fortran code, you may need to download GNU Fortran for arm64 from -project.org/tools. Any external libraries and tools are expected to live in /opt/R/arm64 to not conflict with Intel-based software and this build will not use /usr/local to avoid such conflicts (see the tools page for more details). R-4.2.2.pkg (notarized and signed)SHA1-hash: 99b8d184f855e630ac950ca4e62cb7fc9a1f7b2e(ca. 87MB) for Intel Macs R 4.2.2 binary for macOS 10.13 (High Sierra) and higher, Intel 64-bit (older Macs) build, signed and notarized package. Contains R 4.2.2 framework, R.app GUI 1.79 in 64-bit for Intel Macs, Tcl/Tk 8.6.6 X11 libraries and Texinfo 6.7. The latter two components are optional and can be ommitted when choosing "custom install", they are only needed if you want to use the tcltk R package or build package documentation from sources.Note: the use of X11 (including tcltk) requires XQuartz to be installed (version 2.7.11 or later) since it is no longer part of macOS. Always re-install XQuartz when upgrading your macOS to a new major version.This release supports Intel Macs, but it is also known to work using Rosetta2 on M1-based Macs. For native Apple silicon arm64 binary see above.Important: this release uses Xcode 12.4 and GNU Fortran 8.2. If you wish to compile R packages from sources, you may need to download GNU Fortran 8.2 - see the tools directory. NEWS (for Mac GUI)News features and changes in the R.app Mac GUIMac-GUI-1.78.tar.gz SHA1-hash: 23b3c41b7eb771640fd504a75e5782792dddb2bcSources for the R.app GUI 1.78 for macOS. This file is only needed if you want to join the development of the GUI (see also Mac-GUI repository), it is not intended for regular users. Read the INSTALL file for further instructions.Note: Previous R versions for El Capitan can be found in the el-capitan/base directory.Binaries for legacy OS X systems: R-3.6.3.nn.pkg (signed) SHA1-hash: c462c9b1f9b45d778f05b8d9aa25a9123b3557c4 (ca. 77MB) R 3.6.3 binary for OS X 10.11 (El Capitan) and higher, signed package. Contains R 3.6.3 framework, R.app GUI 1.70 in 64-bit for Intel Macs, Tcl/Tk 8.6.6 X11 libraries and Texinfo 5.2. The latter two components are optional and can be ommitted when choosing "custom install", they are only needed if you want to use the tcltk R package or build package documentation from sources. R-3.3.3.pkgMD5-hash: 893ba010f303e666e19f86e4800f1fbfSHA1-hash: 5ae71b000b15805f95f38c08c45972d51ce3d027(ca. 71MB)R 3.3.3 binary for Mac OS X 10.9 (Mavericks) and higher, signed package. Contains R 3.3.3 framework, R.app GUI 1.69 in 64-bit for Intel Macs, Tcl/Tk 8.6.0 X11 libraries and Texinfo 5.2. The latter two components are optional and can be ommitted when choosing "custom install", it is only needed if you want to use the tcltk R package or build package documentation from sources.Note: the use of X11 (including tcltk) requires XQuartz to be installed since it is no longer part of OS X. Always re-install XQuartz when upgrading your OS X to a new major version. R-3.2.1-snowleopard.pkgMD5-hash: 58fe9d01314d9cb75ff80ccfb914fd65SHA1-hash: be6e91db12bac22a324f0cb51c7efa9063ece0d0(ca. 68MB)R 3.2.1 legacy binary for Mac OS X 10.6 (Snow Leopard) - 10.8 (Mountain Lion), signed package. Contains R 3.2.1 framework, R.app GUI 1.66 in 64-bit for Intel Macs.This package contains the R framework, 64-bit GUI (R.app), Tcl/Tk 8.6.0 X11 libraries and Texinfop 5.2. GNU Fortran is NOT included (needed if you want to compile packages from sources that contain FORTRAN code) please see the tools directory.NOTE: the binary support for OS X before Mavericks is being phased out, we do not expect further releases! The new R.app Cocoa GUI has been written by Simon Urbanek and Stefano Iacus with contributions from many developers and translators world-wide, see "About R" in the GUI.Subdirectories: tools Additional tools necessary for building R for Mac OS X:Universal GNU Fortran compiler for Mac OS X (see R for Mac tools page for details). base Binaries of R builds for macOS 10.13 or higher (High Sierra), Intel build contrib Binaries of package builds for macOS 10.13 or higher (High Sierra), Intel build big-sur-arm64 Binaries for macOS 11 or higher (Big Sur) for arm64-based Macs (aka Apple silicon such as the M1 chip) el-capitan Binaries of package builds for OS X 10.11 or higher (El Capitan build) mavericks Binaries of package builds for Mac OS X 10.9 or higher (Mavericks build) old Previously released R versions for Mac OS X You may also want to read the R FAQ and R for Mac OS X FAQ. For discussion of Mac-related topics and reporting Mac-specific bugs, please use the R-SIG-Mac mailing list.Information, tools and most recent daily builds of the R GUI, R-patched and R-devel can be found at -project.org/. Please visit that page especially during beta stages to help us test the macOS binaries before final release!Package maintainers should visit CRAN check summary page to see whether their package is compatible with the current build of R for macOS.Binary libraries for dependencies not present here are available from -project.org/bin and corresponding sources at -project.org/src.Last modified: 2022/10/31, by Simon Urbanek 2ff7e9595c
Comments